News | March 16, 2012

New Technology Allows CT Scans With Fraction of Current Radiation Dose

March 16, 2012 - A technological breakthrough is allowing the University of Michigan Health System to be the first teaching hospital in the United States to perform some CT scans using a fraction of the radiation dose required for a conventional CT image.

Over the past decade, U-M scientists have contributed to the research behind the new GE Healthcare technology, known as Veo.

“Reducing patients’ radiation exposure is a high priority for us,” says Ella Kazerooni, M.D., M.S., professor of radiology at the U-M Medical School. “The radiation dose for a standard chest CT is equal to about 70 chest x-rays. In comparison, a chest CT using Veo can use a radiation dose equivalent to just one or two chest x-rays."

Doses for scans using Veo, however, will vary depending on factors like the size of the patient, the part of the body being scanned, and the diagnostic task, Kazerooni notes.

Veo was installed on one CT scanner at U-M in late 2011 and the Health System plans to offer the technology more widely in the future. Veo is already in use in Europe, Canada and Asia.

CT, or computed tomography, uses X-rays to diagnose and monitor a variety of health conditions such as cancer, complex bone fractures, blood clots and clogged coronary arteries. The use of CT scans has increased in recent years, leading to concerns about increased lifetime radiation exposure, which may raise one’s risk of developing cancer.

To a trained radiologist like Kazerooni, an image made using Veo looks slightly different than a conventional CT image.

“I might describe it as a little waxy looking,” she says. “But the real question isn’t whether the picture is as pretty, but whether we can see the things we need to see and get the critical information from an image using a much lower dose of radiation. And from what we’ve seen so far, the answer is, yes we can.”

Doctors at U-M stress that Veo is just one component of ongoing efforts to minimize radiation exposure for all patients. Other approaches include using non-ionizing radiation methods like ultrasound and MRI whenever possible; employing protocols that tie radiation dose to a patient’s size (smaller patients require less radiation); and carefully selecting and training CT technologists.

“We’re very excited to be adding Veo to the measures we already have in place to ensure that we get the diagnostic images we need to treat our patients using the lowest amount of radiation possible,” says N. Reed Dunnick, Fred Jenner Hodges Professor of Radiology at the U-M Medical School and chair of the Department of Radiology.

Initially, Veo will be available to a limited number of adult patients because the technology is equipped on only one scanner. U-M plans to offer Veo more widely as it upgrades the seven compatible CT systems at the new C.S. Mott Children’s Hospital and University Hospital campus.

Most of the CT scanners at the University Hospital campus and satellite clinics already employ low-dose technologies and the Department of Radiology is pursuing ongoing efforts to keep radiation doses for all patients to a minimum.

Veo is not a new type of machine, but a new way of processing data, explains Jeff Fessler, Ph.D., a U-M professor in the departments of Electrical Engineering, Computer Science, Radiology and Biomedical Engineering. Using a technique called Model-based Iterative Reconstruction (MBIR), the technology employs sophisticated algorithms to squeeze more information out of the existing X-ray data.

“It uses a less idealized model of the data collected by a CT scanner, so we need less radiation to make a good picture,” says Fessler whose research group has been collaborating with GE on the project for about a decade. “But these more accurate models require more computation.”

A CT scan takes pictures of 64 cross-sections of the body at a time, each less than 1 millimeter thick. A typical scan consists of thousands of these images.

“It’s a staggering amount of data,” he says. “And doctors can‘t just look at the raw data – they need software to process it into a meaningful image.”

While conventional CT images can be processed almost instantaneously, Veo’s advanced number-crunching processes about two scans per hour.

“So, we’re not going to use it on someone in the Emergency Department or our inpatient units who has an medical need to get the results back quickly,” Kazerooni says.

Still, the wait is a lot better than a few years ago, when it would take days to process such massive amounts of data.

“The algorithms are still slower than we want them to be, but we’re already working on developing a next generation that will be faster and make it easier for them to be used more widely,” Fessler notes.

In 2010, Fessler, Kazerooni and their colleagues at U-M were awarded a $1.9 million grant from the National Institutes of Health to work with collaborators from GE Global Research to develop MBIR methods for improving lung CT imaging.

“By developing this next generation technology alongside world class research universities like the University of Michigan, we’re able to help physicians deliver remarkably clear images at unprecedented low dose levels for their patients,” says Steve Gray, vice president and general manager of CT and Advantage Workstation for GE Healthcare.

For more information: http://ns.umich.edu/htdocs/releases/story.php?id=8368

Related Content

Video Plus Brochure Helps Patients Make Lung Cancer Scan Decision

Image courtesy of the American Thoracic Society

News | Lung Cancer | April 19, 2019
A short video describing the potential benefits and risks of low-dose computed tomography (CT) screening for lung...
FDA Clears GE's Deep Learning Image Reconstruction Engine
Technology | Computed Tomography (CT) | April 19, 2019
GE Healthcare has received 510(k) clearance from the U.S. Food and Drug Administration (FDA) of its Deep Learning Image...
Qaelum NV and Toyo Corp. Sign Japanese Distribution Agreement for Dose Monitoring Solution
News | Radiation Dose Management | April 10, 2019
Qaelum NV of Leuven, Belgium, and Toyo Corp. of Tokyo, Japan announced they have entered into a cooperation agreement...
Omega Medical Imaging Launches AI-enabled FluoroShield for Radiation Reduction
Technology | Radiation Dose Management | April 04, 2019
The U.S. Food and Drug Administration (FDA) granted Omega Medical Imaging 510(k) clearance to offer their artificial...
Videos | RSNA | April 03, 2019
ITN Editor Dave Fornell takes a tour of some of the most interesting new medical imaging technologies displa
Johns Hopkins Medicine First in U.S. to Install Canon Medical's Aquilion Precision
News | Computed Tomography (CT) | March 26, 2019
March 26, 2019 — Johns Hopkins Medicine now has access to the first...
At #ACC.19, Siemens unveiled a version of its go.Top platform optimized for cardiovascular imaging. The newly packaged scanner can generate the data needed to do CT-based FFR (fractional flow reserve).

At #ACC.19, Siemens unveiled a version of its go.Top platform optimized for cardiovascular imaging. The newly packaged scanner can generate the data needed to do CT-based FFR (fractional flow reserve). Photo by Greg Freiherr

Feature | Cardiac Imaging | March 22, 2019 | By Greg Freiherr
Reflecting a trend toward the increased use of...
Researchers Use Radiomics to Predict Who Will Benefit from Chemotherapy
News | Radiomics | March 21, 2019
Using data from computed tomography (CT) images, researchers may be able to predict which lung cancer patients will...
HeartFlow Analysis Successfully Stratifies Heart Disease Patients at One Year
News | CT Angiography (CTA) | March 19, 2019
Late-breaking results confirm the HeartFlow FFRct (fractional flow reserve computed tomography) Analysis enables...
Podcast | Cardiac Imaging | March 15, 2019
Debate About Coronary Testing Highlights ACC Session