Technology | Computed Tomography (CT) | October 06, 2016

MedicVision Highlighting SafeCT-29 Solution at RSNA 2016

CT dose optimization product line also includes SafeCT Enterprise and SafeCT Dose Reporting

Medic Vision, SafeCT-29, RSNA 2016, SafeCT Enterprise, SafeCT Dose Reporting

October 6, 2016 — Medic Vision is exhibiting at the 2016 Annual Meeting of the Radiological Society of North America (RSNA 2016) and will be highlighting its SafeCT-29 product.

The SafeCT product line enhances computed tomography (CT) images acquired with low-dose protocols. SafeCT-29 is the only U.S. Food and Drug Administration (FDA)-approved third-party solution that offers XR-29 functionality to help achieve Smart Dose Compliance, according to Medic Vision.

The SafeCT product line also includes SafeCT Enterprise and SafeCT Dose Reporting.

The SafeCT-29 product was recently endorsed by Philips Healthcare as a solution for customers that have computed tomography (CT) and positron emission tomography (PET)/CT scanners that are not fully compliant with XR-29 standards and for which Philips does not offer an XR-29 update.

For more information: www.medicvision.com

Related Content

The Siemens Somatom Go.Sim computed tomography (CT) system for dedicated radiation therapy planning

The Siemens Somatom Go.Sim computed tomography (CT) system for dedicated radiation therapy planning. Image courtesy of Siemens Healthineers.

News | Computed Tomography (CT) | September 15, 2019
Siemens Healthineers debuted two computed tomography (CT) systems dedicated to radiation therapy (RT) planning at the...
Philips Showcases Integrated Radiation Oncology Portfolio at ASTRO 2019
News | Radiation Oncology | September 13, 2019
Philips will showcase its integrated radiation oncology portfolio at the American Society of Radiation Oncology (ASTRO...
Richardson Healthcare Receives CE Mark Approval for ALTA750 Canon/Toshiba CT Replacement Tube
News | Computed Tomography (CT) | September 11, 2019
Richardson Healthcare, a Division of Richardson Electronics Ltd., announced it has received CE Mark approval for the...
Bayer Introduces Medrad Stellant Flex CT Injection System
Technology | Contrast Media Injectors | September 11, 2019
Bayer announced the introduction of the Medrad Stellant Flex computed tomography (CT) injection system. Stellant Flex...
ASNC Announces Multisocietal Cardiac Amyloidosis Imaging Consensus
News | Cardiac Imaging | September 09, 2019
September 9, 2019 — The American Society of Nuclear Cardiology (ASNC) published a new expert consensus document along
AJR Publishes Gender Affirmation Surgery Primer for Radiologists. transgender radiology images,

Scout image from contrast-enhanced CT shows erectile implant; stainless steel and silicone anchors (arrow) transfixed to pubic bone are asymmetric.

News | Orthopedic Imaging | September 05, 2019
September 5, 2019 — An ahead-of-print article published in the December issue of the American Journal of Roentgen
Wearing personal radiation measurement badges to measure dose exposure is crucial.

Wearing personal radiation measurement badges to measure dose exposure is crucial.

Feature | Radiation Dose Management | September 04, 2019 | By Mukta Acharya
Doctors and technicians are exposed to...
The CT scanner might not come with protocols that are adequate for each hospital situation, so at Phoenix Children’s Hospital they designed their own protocols, said Dianna Bardo, M.D., director of body MR and co-director of the 3D Innovation Lab at Phoenix Children’s.

The CT scanner might not come with protocols that are adequate for each hospital situation, so at Phoenix Children’s Hospital they designed their own protocols, said Dianna Bardo, M.D., director of body MR and co-director of the 3D Innovation Lab at Phoenix Children’s.

Sponsored Content | Case Study | Radiation Dose Management | September 04, 2019
Radiation dose management is central to child patient safety. Medical imaging plays an increasing role in the accurate...
A 3-D printed tungsten pre-clinical X-ray system collimator. 3D printed, additive manufacturing for medical imaging.

A 3-D printed tungsten pre-clinical X-ray system collimator. The tungsten alloy powder is printed into the form desired and is laser fused so it can be machined and finished. Previously, making collimators from Tungsten was labor intensive because it required working with sheets of the metal to create the collimator matrix. 

Feature | Medical 3-D Printing | September 04, 2019 | By Steve Jeffery
In ...
Medical Imaging Rates Continue to Rise Despite Push to Reduce Their Use
News | Radiology Imaging | September 03, 2019
Despite a broad campaign among physician groups to reduce the amount of medical imaging, use rates of various scans...