Feature | March 18, 2014 | Dave Fornell

Joint Commission Calls for Use of Radiation Dose Monitoring

I have watched a trend in medical technology grow from a small ripple a couple years ago into what I expect will be a tidal wave in 2014 due to growing concern over patient radiation dose levels from medical imaging. Use of radiation dose monitoring software came to the forefront when California, followed by Texas, created laws requiring medical facilities to record the amount of exposure patients receive from things like computed tomography (of which cardiac exams are among the highest dose levels used) and angiography. Adoption of this software will be further accelerated by new Joint Commission standards released in December 2013, which starting in mid-2014 requires the use of radiation dose monitoring software as part of its accreditation.

The Joint Commission’s view is that it is not possible for a medical facility to know exactly how it is doing in regards to patient radiation safety or use of “as low as reasonably achievable” (ALARA) dosing principles if it does not track the data. The software enables hospitals to build a more robust radiation safety program and re-evaluate its radiation safety practices. Empirical data from these systems offer justification for changing imaging protocols and revision of workflows in both radiology exams and interventional procedures. 
 
In addition to requiring a method for collecting and storing dose data within the patient’s clinical record, the Joint Commission guidelines call for implementation of a robust and dynamic radiation safety program. This includes an engaged radiation safety committee and physicist who regulate radiation safety practices, annual performance evaluations of imaging equipment by a medical physicist, registration and certification of all radiology technologists, and updated protocols for all imaging procedures including the pediatric population.
 
Additionally, there is a general feeling in radiology that it is only a matter of time before more states legislate the use of radiation dose monitoring software. There is also an expectation that dose level guidelines may eventually be set for all imaging protocols by the American College of Radiology (ACR), based on its national Dose Index Registry. This would be similar to practice guidelines set by organizations such as the American College of Cardiology (ACC), American Heart Association (AHA) or the Heart Rhythm Society (HRS).  
 
I suspect radiation dose monitoring software will be among the ?highlights on the expo floor at radiology and cardiology shows in 2014.
 
For more on this software, see the article and comparison chart from the March April 2014 issue of DAIC. 
 

Related Content

Video Plus Brochure Helps Patients Make Lung Cancer Scan Decision

Image courtesy of the American Thoracic Society

News | Lung Cancer | April 19, 2019
A short video describing the potential benefits and risks of low-dose computed tomography (CT) screening for lung...
FDA Clears GE's Deep Learning Image Reconstruction Engine
Technology | Computed Tomography (CT) | April 19, 2019
GE Healthcare has received 510(k) clearance from the U.S. Food and Drug Administration (FDA) of its Deep Learning Image...
Qaelum NV and Toyo Corp. Sign Japanese Distribution Agreement for Dose Monitoring Solution
News | Radiation Dose Management | April 10, 2019
Qaelum NV of Leuven, Belgium, and Toyo Corp. of Tokyo, Japan announced they have entered into a cooperation agreement...
Omega Medical Imaging Launches AI-enabled FluoroShield for Radiation Reduction
Technology | Radiation Dose Management | April 04, 2019
The U.S. Food and Drug Administration (FDA) granted Omega Medical Imaging 510(k) clearance to offer their artificial...
Videos | RSNA | April 03, 2019
ITN Editor Dave Fornell takes a tour of some of the most interesting new medical imaging technologies displa
Johns Hopkins Medicine First in U.S. to Install Canon Medical's Aquilion Precision
News | Computed Tomography (CT) | March 26, 2019
March 26, 2019 — Johns Hopkins Medicine now has access to the first...
At #ACC.19, Siemens unveiled a version of its go.Top platform optimized for cardiovascular imaging. The newly packaged scanner can generate the data needed to do CT-based FFR (fractional flow reserve).

At #ACC.19, Siemens unveiled a version of its go.Top platform optimized for cardiovascular imaging. The newly packaged scanner can generate the data needed to do CT-based FFR (fractional flow reserve). Photo by Greg Freiherr

Feature | Cardiac Imaging | March 22, 2019 | By Greg Freiherr
Reflecting a trend toward the increased use of...
Researchers Use Radiomics to Predict Who Will Benefit from Chemotherapy
News | Radiomics | March 21, 2019
Using data from computed tomography (CT) images, researchers may be able to predict which lung cancer patients will...
HeartFlow Analysis Successfully Stratifies Heart Disease Patients at One Year
News | CT Angiography (CTA) | March 19, 2019
Late-breaking results confirm the HeartFlow FFRct (fractional flow reserve computed tomography) Analysis enables...
Podcast | Cardiac Imaging | March 15, 2019
Debate About Coronary Testing Highlights ACC Session