Feature | April 26, 2013 | Dave Fornell

Hospitals Focus on New Technology to Lower CT Radiation Dose

This article appeared as an introduction to a Comparison Chart on CT Dose in the April 2013 issue.

liver metastasis, iterative reconstruction

This example shows the same patient's scan made with a 0.61 mSv dose. The left image was reconstructed with standard filtered back projection, while the right shows a Veo iterative reconstruction. The Veo image was able to define a liver metastasis. (Image courtesy of GE Healthcare)

New computed tomography (CT) dose studies and growing public media attention have made minimizing unnecessary radiation dose to patients a priority for medical imaging facilities. In addition, state regulatory agencies and accrediting bodies are increasing their oversight and regulation of radiation dose. Reducing dose while maintaining good clinical image quality, however, is complex. 

“Facilities are now being presented with a host of options from various vendors — dose tracking and analysis software, scanner hardware upgrades, technologist training, protocol optimization and more,” said W. Geoffrey West, Ph.D., president and chief medical physicist of West Physics Consulting, a national provider of medical and health physics consulting and testing services. “The radiation dose auditing and consultation services we have developed will: 1) assess the radiation doses a facility is starting with in each modality; 2) identify where improvements need to be made; 3) go ahead and make the most urgent and cost-effective improvements immediately with protocol optimization and enhanced staff training to reduce doses considerably; 4) quantify those improvements so the facility can inform patients, staff and referring physicians about their success; and 5) objectively evaluate how further available software and hardware upgrades would help lower doses even more.”

West Physics Consulting is one of many companies now offering CT dose reduction services. Another consulting provider is ECRI Institute, an independent nonprofit organization that researches the best approaches to improving patient care. It recently expanded its CT safety services to help hospitals and healthcare systems. 

All CT manufacturers now offer versions of iterative reconstruction software to enhance the image quality of lower-dose CT scans. While differences in implementation exist, ECRI Institute clinical engineers determined through independent testing completed in 2011 that the overall effectiveness of the techniques is similar. 

New Iterative Reconstruction Technology

Four of the major CT vendors introduced new iterative reconstruction software in 2012. GE Healthcare’s Veo iterative reconstruction technology can achieve clear chest CT images with less than 1 mSv of dose. Traditional chest CT scans can expose patients to anywhere from 5 to 10 mSv, and natural background radiation exposes the average American to around 3 mSv per year. GE also offers DoseWatch, a management tool that helps providers measure, track and optimize patient dose over time, and ASiR, GE’s standard iterative reconstruction software, available across GE Healthcare’s CT portfolio.

Siemens received U.S. Food and Drug Administration (FDA) clearance in June 2012 for the Somatom Perspective, an advanced 128-slice CT scanner. It uses the sinogram affirmed iterative reconstruction (SAFIRE) software to reduce dose by up to 60 percent compared to previous filtered back projection techniques.

Toshiba also released the newest version of its radiation dose reduction technology, Adaptive Iterative Dose Reduction 3D (AIDR 3D), in 2012, which is available on all new Aquilion CT systems. 

Philips introduced the iDose4 Premium Package, which includes two technologies that can improve image quality — the iDose4 iterative reconstruction technique and metal artifact reduction for large orthopedic implants (O-MAR). Together, the technologies of the iDose4 Premium Package (iDose4 and O-MAR) produce high image quality with reduced artifacts.

Creating a Dose Index 

While the CT scanner and reconstruction software technology is important, ECRI says dose monitoring and measuring also are critical to achieving lower radiation doses, explaining that one cannot control something that isn’t being measured. To facilitate dose monitoring, ECRI says a number of software options are becoming available, both from CT manufacturers and third parties. ECRI Institute believes these tools are just as important as CT scanner technology and will be vital for optimizing CT dose. 

There are questions as to what are appropriate doses for various types of exams and patient sizes. In addition, not all facilities are on the same page with dose protocols or how they record dose. This prompted the American College of Radiology (ACR) to create its Dose Index Registry (DIR). In less than two years the registry has gathered data from more than 5 million CT scans that will help establish national benchmarks for CT dose indices.

 The DIR is a radiology data registry that provides standardized, size-adjusted CT dose indices that facilitate meaningful comparisons, allowing imaging facilities to compare their CT dose indices to regional and national values. Information related to dose indices for all CT exams is collected, anonymized, transmitted to the ACR and stored in a database. Institutions are then provided with periodic feedback reports comparing their results by body part and exam type to aggregate results. 

Once established, it is very likely the ACR dose indices will be incorporated into ACR appropriateness criteria software added to CT systems and PACS as part of clinical decision support/imaging ordering systems. 

Related Content

Researchers Awarded 2018 Canon Medical Systems USA/RSNA Research Grants
News | Radiology Imaging | November 13, 2018
The Radiological Society of North America (RSNA) Research & Education (R&E) Foundation recently announced the...
The Fujifilm FCT Embrace CT System displayed for the first time at ASTRO 2018.
360 Photos | 360 View Photos | November 07, 2018
Fujifilm's first FDA-cleared compu...
MaxQ AI Receives FDA Clearance for Accipio Ix Intracranial Hemorrhage Platform
Technology | Artificial Intelligence | November 07, 2018
MaxQ AI announced that its Accipio Ix intracranial hemorrhage (ICH) detection software has received 510(k) clearance...
GE Healthcare Discovery RF Gen 2 system displayed at ASTRO 2018. It is a dedicated computed tomography (CT) scanner for radiation oncology
360 Photos | 360 View Photos | November 07, 2018
This is the GE Healthcare Discovery RF Gen 2 system displayed at the ...
Results of the vertebrae-based analysis (383 vertebrae in 34 patients) for detection of BME.

Results of the vertebrae-based analysis (383 vertebrae in 34 patients) for detection of BME.

Sponsored Content | Case Study | Computed Tomography (CT) | November 06, 2018
The following is a summary of a study published in the
The NeuViz 16 Essence from Neusoft Medical Systems.

The NeuViz 16 Essence from Neusoft Medical Systems.

Feature | Computed Tomography (CT) | November 05, 2018 | By Melinda Taschetta-Millane
According to an industry mark...
Carestream Spotlights Healthcare IT and Imaging Systems at RSNA 2018
News | Information Technology | October 31, 2018
Carestream announced it will be displaying several imaging and healthcare information technology (IT) offerings at the...
IMRIS, Siemens Strengthen Collaboration in Hybrid OR Neurosurgical Market
News | Hybrid OR | October 24, 2018
IMRIS, Deerfield Imaging, in partnership with Siemens Healthineers, announced a strengthened collaboration to advance...
Fujifilm Unveils FCT Embrace CT System for Oncology
Technology | Computed Tomography (CT) | October 23, 2018
Fujifilm Medical Systems U.S.A. Inc. recently introduced the FCT Embrace computed tomography (CT) system. Powered by...
The Aquilion Precision CT system from Canon offers very high resolution imaging, which may aid in cancer detection and improved treatment planning in radiation oncology. #ASTRO2018 #ASTRO #ASTRO18

The Aquilion Precision CT system from Canon offers very high resolution imaging, which may aid in cancer detection and improved treatment planning in radiation oncology. 

News | Computed Tomography (CT) | October 19, 2018
October 19, 2018 – At the 2018 American Society of...