November 17, 2023 — With the SOMATOM Pro.Pulse1, Siemens Healthineers presents a new Dual Source computed tomography (CT) scanner that is more accessible for smaller and rural facilities as well as outpatient diagnostic centers. Lifecycle costs are lower than other Dual Source systems due to an improved cooling system and more efficient power consumption. Therefore, this system for the first time breaks the lifestyle cost – one of the main barriers for the adoption of Dual Source, a signature Siemens Healthineers technology. “With our new advanced Dual Source CT scanner, we aim to make this high-class technology available to more patients. CT exams performed on this system follow an intelligent and intuitive workflow appealing to various levels of experience. This enables standardization and reproducibility for clinicians and thus saves personnel capacities,” said Philipp Fischer, head of Computed Tomography at Siemens Healthineers.
“We are happy to finally be able to use this high-end technology in our facility. The clinical role of CT is expanding into a key player in early detection and therapy planning. Therefore, we need a high-performance system allowing exams for an even broader patient group. With SOMATOM Pro.Pulse, we are able to perform high-quality cardiac imaging, and in other areas of radiology,” said Dr. Quoc-Duy VO, head of radiology department in Morges Hospital, Switzerland2. Dual Source computed tomography – CT scanners with two radiation tubes and detectors each – allows for very high temporal resolution. High temporal resolution and scan speed are important for CT scans of the heart to limit image artifacts from breathing or motion of the heart. This enables scanning patients with various challenging clinical conditions, such as patients with high or irregular heart rates, inability to hold their breath or to stay still, as well as with difficulties following clinicians’ instructions. The use of tin filters keeps the radiation dose low while maintaining optimum image quality, especially in clinical indications like ultra-low dose thorax scans for screening.
With the intelligent workflow of myExam Companion, SOMATOM Pro.Pulse significantly simplifies exams while personalizing scanning for each patient. myExam Companion combines patient data such as gender, height, and age, and collects information that is relevant for CT scans such as heart rate or breath-hold capabilities. The scanner then optimizes the scan parameters and tailors a patient-specific scan protocol. The FAST (Fully Assisting Scanner Technologies) 3D camera automatically performs precise and consistent patient positioning. Both features help reduce the time clinicians spend on routine tasks. With around 20 percent lower power consumption than previous Dual Source generations, the system is more sustainable and keeps running costs low.
For more information: www.siemens-healthineers.com
References:
1 SOMATOM Pro.Pulse is pending 510(k) clearance and is not yet commercially available in the United States and other countries. Their future availability cannot be ensured.
2 The statements by Siemens Healthineers customers described herein are based on results that were achieved in the customer's unique setting. Because there is no “typical” hospital or laboratory and many variables exist (e.g., hospital size, samples mix, case mix, level of IT and/or automation adoption), there can be no guarantee that other customers will achieve the same results.
March 06, 2026 
