News | X-Ray | November 11, 2016

High Resolution Detectors to Create Safer X-ray Diagnosis

New technology combines the advantages of direct and indirect converters to achieve high image quality at reduced radiation doses

DICOMO, X-ray, high resolution detectors, Europe

DICOMO 5um view of (top) Scintillating micro-particles (white) embedded in an organic semiconducting bulk (dark) and (below)Active pixel metal-oxide backplane

November 11, 2016 — A European health consortium is developing a set of low-radiation, low-cost, flat panel X-ray detectors that use novel photonics technology to make diagnosis safer for patients, hospital and dental staff. These new panels reportedly generate some of the highest resolution images ever seen in rapid moving body functions, such as malicious growths or the beating heart of a baby.    

With over 22 million X-rays being recorded in the National Health System (NHS) in England last year, they are a diagnostic test that most are familiar with. Scientists have often sought to reduce harmful ionizing radiation, the high-energy particles that penetrate tissue to reveal internal organs and bone structures that can damage DNA, from single X-ray records or computed tomography (CT) scans.

Although this ionizing radiation can be reduced, traditionally it has come at the expense of the image resolution and type of detector.

As a result of the two types of X-ray technology that exist today, diagnosis can only take the form of a high resolution image, seen with ‘direct converters’ that are used in mammography, or a low radiation dose, seen with ‘indirect converters’ that are used in radiography or fluoroscopy.

Direct converters are based on semiconductors which directly convert X-rays into electrical signals (e.g. amorphous selenium), while indirect converters make use of scintillators (e.g. cesium iodide) which emit light upon X-ray irradiation, and convert it into electrical signals by a photodetector.

One is fine for micro-anomalies in breast tissue, the other for larger structures like bones or larger blood vessels, but never has there been a hybrid of the two.

Combining these advantages, the DiCoMo, (or ‘Direct conversion hybrid-organic X-ray detectors on metal oxide backplane’) project is developing a new digital X-ray detector capable of producing high-resolution images that, in the envisioned product, rival a 16 megapixel photograph. With lower radiation doses and at a fraction of the cost, this is excellent news for staff at hospitals like radiologists or dentists and patients, particularly small children.

Current indirect detectors, which offer a lower dose of radiation, generate light in all directions as soon as an X-ray photon is absorbed in it, hitting a large number of pixels on the photodetector array and creating limited spatial resolution.

Project coordinator Sandro Tedde of Siemens Healthineers explained, “The result is like a blurred photograph, or frosted bathroom glass, where light bounces off the surface at different angles. In indirect converters, there is always a compromise between resolution and sensitivity.”

DiCoMo combines the advantages of both technologies by fusing radical innovations in the frontplane, the part of the device converting X-rays into electrical signals, and the backplane, which stores and drives the signals from the pixels to the readout circuitry and digital image reconstruction.

It works by getting an “indirect converter,” with low radiation output, to behave in the way one would expect to see a “direct converter” perform, a technique DiCoMo calls the “Quasi-Direct” effect. This allows the images to have the high resolution typical for direct converters by using scintillators and the great sensitivity they enable.

Contrary to the indirect approach, where the scintillator is stacked on top of the photodetector array, the DiCoMo technique embeds the scintillator into the photodetector itself. This means the absorption of light occurs right where it has been generated and no optical ‘crosstalk’ between pixels occurs. This produces high spatial resolution typically seen in direct converters, a result never before achieved.

DiCoMo’s second innovation is in the technology of the backplane, which is developed by TNO and IMEC, where the “active pixels” made from metal-oxide thin-film transistors amplify the charge within the backplane pixel itself, creating a stronger signal in situ.

Active pixels are state of the art in CMOS imagers but have not been used so far in imagers based on transistor technologies made of amorphous semiconductors, like those used in medical X-ray detectors. A customized readout chip (ROIC) developed by the partner ICSense is key for enabling the readout of the active pixel array and achieving the envisioned high frame rates.

“Similar to CMOS camera technology, where millions of tiny photo sensors and transistors create an electrical current when exposed to light, our Active Pixel technology gives us a louder signal at a much higher frame rate than ever before” said Tedde.

“The fastest flat panel X-ray detectors with state-of-the-art technology deliver around 60 frames per second, whereas DiCoMo aims to double this by capturing at 130 fps, permitting a physician to examine vital organs not only in high resolution, but also moving images in slow motion.”

DiCoMo came up with the solution of using a hybrid X-ray absorption and conversion layer by embedding scintillating micro-particles into an organic semiconductor photo detecting bulk, in a pattern resembling the raisin parts in a raisin loaf. This prevents the light from being widely spread over several pixels since the light to electrical signal conversion occurs in the same pixel where the X-ray photon has been absorbed, preserving the spatial information.

Earlier last year, the DiCoMo consortium received funding of €3,277,034.75 from the Photonics Public Private Partnership, via the European Commission’s H2020 program for a three-year research project in a Research and Innovation action. Hoping to have these revolutionary new X-ray detectors ready within five years, Tedde is excited about the implications for the future. “The versatility of this device is impressive not just for its use medical, veterinary and dental surgeries, but also with its increased speed and resolution, the DiCoMo detector would be really attractive to customs or the military for scanning relevant material,” he said.

Coordinated in Germany by Siemens Healthineers, the project is made up of partners from Switzerland, Belgium, the Netherlands and Italy, including BASF Switzerland, Belgian microelectronics center IMEC, Dutch research company TNO, Belgian chip designer ICsense NV and Italian simulation specialist MorphwiZe.

For more information:

Related Content

FDA Clears GE Healthcare's Critical Care Suite Chest X-ray AI
Technology | X-Ray | September 12, 2019
GE Healthcare announced the U.S. Food and Drug Administration’s (FDA) 510(k) clearance of Critical Care Suite, a...
Richardson Healthcare Receives CE Mark Approval for ALTA750 Canon/Toshiba CT Replacement Tube
News | Computed Tomography (CT) | September 11, 2019
Richardson Healthcare, a Division of Richardson Electronics Ltd., announced it has received CE Mark approval for the...
OSF HealthCare Expands Portfolio of Carestream Imaging Solutions
News | Digital Radiography (DR) | September 04, 2019
OSF HealthCare in Peoria, Ill., recently added a new Carestream DRX-Evolution Plus System to its portfolio of...
A 3-D printed tungsten pre-clinical X-ray system collimator. 3D printed, additive manufacturing for medical imaging.

A 3-D printed tungsten pre-clinical X-ray system collimator. The tungsten alloy powder is printed into the form desired and is laser fused so it can be machined and finished. Previously, making collimators from Tungsten was labor intensive because it required working with sheets of the metal to create the collimator matrix. 

Feature | Medical 3-D Printing | September 04, 2019 | By Steve Jeffery
In ...
The Siemens Ysio Max digital radiography system.
Webinar | Digital Radiography (DR) | September 03, 2019
The Webinar "Benefits of Advanced Automation in X-ray" will be presented Wednesday, Sept. 25 at 1 p.m.
Siemens Healthineers Announces First U.S. Installation of Mobilett Elara Max
News | Digital Radiography (DR) | August 28, 2019
UCHealth Greeley Hospital of Greeley, Colo., recently became the first healthcare facility in the United States to...
Videos | Radiographic Fluoroscopy (RF) | August 09, 2019
Shimadzu displayed the FluoroSpeed X1 conventional...
Shimadzu Medical Systems Receives FDA 510(k) for FluoroSpeed X1 RF System
Technology | Radiographic Fluoroscopy (RF) | August 09, 2019
Shimadzu Medical Systems USA, a subsidiary of Shimadzu Corp., announced they have received U.S. Food and Drug...
Samsung Announces New iQuia Premium Digital Radiography Platform
Technology | Digital Radiography (DR) | July 25, 2019
Samsung has announced iQuia, a new digital radiography (DR) platform of premium products and technologies that improves...
Konica Minolta and Shimadzu to Co-market Dynamic Digital Radiography in the U.S.
News | Digital Radiography (DR) | July 23, 2019
Konica Minolta Healthcare Americas Inc. along with Shimadzu Medical Systems USA announced a collaborative agreement to...