News | Orthopedic Imaging | October 26, 2017

Portable 3-D Scanner Assesses Patients with Elephantiasis

Device measures swollen limbs faster, more easily than other methods

Portable 3-D Scanner Assesses Patients with Elephantiasis

A portable scanning device produces a 3-D reconstruction of swollen legs caused by lymphatic filariasis, a disease that infects millions globally. Researchers at Washington University School of Medicine in St. Louis and colleagues in Sri Lanka will use the device to collect limb measurements for a clinical research trial examining whether the antibiotic doxycycline can reduce the severity of swelling. Image courtesy of Michael J. Weiler/LymphaTech

October 26, 2017 — Scientists at Washington University School of Medicine in St. Louis, working with collaborators in Sri Lanka, have shown that a portable scanning device can measure limb enlargement and disfigurement faster and more easily in patients with elephantiasis. The research tool makes it easy to obtain accurate measurements and determine whether treatments to reduce swelling are effective.

An estimated 120 million people worldwide are infected with lymphatic filariasis, a parasitic, mosquito-borne disease that can cause major swelling and deformity of the legs, known as elephantiasis. Healthcare workers rely on leg measurements to assess the severity of the condition. However, measuring legs that are severely swollen often proves cumbersome and impractical.

“This is important because it will allow doctors and researchers to take very accurate limb measurements in developing nations, where there are often limited tools to monitor swollen limbs,” said senior author Philip J. Budge, M.D., Ph.D., an assistant professor of medicine in the Division of Infectious Diseases at Washington University.

In patients with elephantiasis, the parasitic worms that cause the disease make their way into the lymphatic system and prevent the lymph vessels from working properly, which leads to swollen legs. This condition also is referred to as lymphedema.

“Unfortunately, the medication does not usually reverse lymphedema in those already affected,” Budge said. “The ability to get these measurements rapidly will make it much easier to treat patients, including those in clinical trials exploring better treatment therapies.”

The device is essentially an infrared sensor, mounted on an iPad, that produces a highly accurate, virtual 3-D reconstruction of the legs using scanning technology similar to that found in Microsoft’s Xbox Kinect video game system. It was created by Atlanta-based startup LymphaTech to measure lymphedema that sometimes develops in cancer patients after lymph nodes are removed during surgery.

After learning about the technology, Washington University researchers Budge and Ramakrishna Rao, Ph.D., an associate professor of medicine, teamed up with international partners to test the device on 52 patients with varying stages of lymphedema at a clinic in Galle, Sri Lanka. Working with physicians at the clinic, the team compared scanner results with results from two other techniques frequently used to ascertain the severity of elephantiasis: use of a tape measure, and water displacement.

Tape measures allow researchers to measure limb circumference near the knees, feet and ankles. However, Budge said, the method can be difficult to standardize and unreliable in assessing leg volume because of bumpy, uneven skin surfaces caused by the swelling.

The water displacement procedure entails patients submerging a leg in a water tank and then measuring how much water is displaced. Each leg is done separately. “This is the gold standard for measuring limb volume, but it is cumbersome and impractical to use in field studies,” Budge said. “Some patients have lymphedema so severe, they have difficulty getting a leg into the water tank or standing still long enough for all the water to drain out. Or they may have open wounds that complicate the process.”

The study showed that the infrared scanner provided measurements of leg volume and of limb circumference at multiple points that were just as accurate and precise as those obtained by tape measure and water displacement.

“But the most encouraging news is that the scanner produced highly accurate results in only a fraction of the time of the other tests,” Budge said.

Researchers found that the average time required for scanner measurements of both legs was 2.2 minutes. In comparison, the tape measure and water displacement methods took an average of 7.5 minutes and 17.4 minutes, respectively.

“The scanning tool also offers convenience,” Budge said. “Many patients with swollen limbs often have great difficulty traveling from their homes to the clinic to have their measurements taken. The scanner should make it possible to take extremely accurate limb measurements in the patients’ homes or villages, without cumbersome equipment or inconveniencing patients.

“To our knowledge, this is the first time that infrared 3-D scanning technology has been used in patients with filarial lymphedema,” he added. “It worked so well that it has been added as a measurement tool in a future clinical trial in which we are collaborating.”

That study is a two-year, multisite, international clinical trial to determine whether the antibiotic doxycycline can reduce the severity of swelling and disfigurement in patients with lymphatic filariasis. Enrollment for Washington University’s partner site in Sri Lanka is scheduled to start this fall.

The study is published online Oct. 16 in The American Journal of Tropical Medicine and Hygiene.

For more information: www.ajtmh.org

Related Content

RSNA and ACR to Collaborate on Landmark Medical 3D Printing Registry
News | Medical 3-D Printing | August 08, 2019
The Radiological Society of North America (RSNA) and the American College of Radiology (ACR) will launch a new medical...
Synaptive Medical Launches Modus Plan With Automated Tractography Segmentation
Technology | Neuro Imaging | August 07, 2019
Synaptive Medical announced the U.S. launch and availability of Modus Plan featuring BrightMatter AutoSeg. This release...
TeraRecon Unveils iNtuition AI Data Extractor
News | Advanced Visualization | July 03, 2019
Artificial Intelligence (AI) and advanced visualization company TeraRecon announced its new iNtuition AI Data Extractor...
A 3-D printed model (left) and a model constructed in augmented reality (right), both of a kidney with a tumor. In both models, the kidney is clear; the tumor is visible in purple on the AR model and in white on the 3-D printed model.

A 3-D printed model (left) and a model constructed in augmented reality (right), both of a kidney with a tumor. In both models, the kidney is clear; the tumor is visible in purple on the AR model and in white on the 3-D printed model. Photo courtesy of Nicole Wake, Ph.D.

Feature | Advanced Visualization | July 02, 2019 | By Jeff Zagoudis
Three-dimensional (3-D) printing and...

Image courtesy of Philips Healthcare

Feature | Molecular Imaging | July 01, 2019 | By Sharvari Rale
Diagnostic procedures have always been a cornerstone of early prognosis and patient triaging.
TeraRecon Receives FDA Clearance for Northstar AI Results Explorer
Technology | Artificial Intelligence | June 20, 2019
Advanced visualization and artificial intelligence (AI) technology provider TeraRecon has successfully completed a U.S...
Materialise Receives FDA Clearance for Cardiovascular Planning Software Suite
Technology | Advanced Visualization | June 13, 2019
Three-dimensional (3-D) printing software and solutions company Materialise has received U.S. Food and Drug...
Konica Minolta Healthcare Announces Autologous Biologics Workshop in Partnership With EmCyte Corp.
News | Ultrasound Imaging | June 12, 2019
Konica Minolta Healthcare announced a new autologous biologics workshop in partnership with EmCyte Corp. The workshop...
Aidoc Earns FDA Approval for AI for C-spine Fractures
Technology | Artificial Intelligence | June 11, 2019
Radiology artificial intelligence (AI) provider Aidoc announced the U.S. Food and Drug Administration (FDA) has cleared...
Medivis SurgicalAR Gets FDA Clearance
Technology | Virtual and Augmented Reality | June 10, 2019
Medivis announced that its augmented reality (AR) technology platform for surgical applications, SurgicalAR, has...