Technology | May 27, 2015

EOS imaging Announces CE Mark for kneeEOS for Total Knee Arthroplasty the first 3D Stereo-Radiographic Planning Software

Stereo-radiographic planning software marks second EU-approved offering in EOS’ 3-D cloud-based surgical planning suite

May 27, 2015 — EOS imaging announced the CE mark of kneeEOS, a 3-D planning software for total knee arthroplasty (TKA) based on EOS bi-planar imaging. The company will showcase the planning suite at the 16th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) Congress, May 27-29 in Prague.

kneeEOS is the second software offering powered by EOS images following hipEOS. This 3-D surgical planning platform is based on EOS’ low-dose 3-D images and technology from OneFit Medical, a company acquired by EOS imaging in late 2013. kneeEOS will initially be deployed as an online service to assist surgeons in patient’s leg alignment simulation in functional position, knee prosthesis selection and placement simulation based upon 3-D images generated by the EOS system.

The EOS system provides full-body stereo-radiographic images of patients in functional positions, in both 2-D and 3-D. EOS exams require a radiation dose 50 to 85 percent less than digital radiology and 95 percent less than basic computed tomography (CT) scans, as well as related software solutions.

For more information: www.eos-imaging.com

Related Content

Brainlab Introduces Loop-X Mobile Intraoperative Imaging Robot
News | Mobile C-Arms | September 26, 2019
Digital medical technology company Brainlab unveiled Loop-X, which it calls the first mobile intraoperative imaging...
Virtual Reality 3-D Models Help Yield Better Surgical Outcomes

Joseph Shirk, M.D., of UCLA with the virtual reality headset. Image courtesy of UCLA Jonsson Comprehensive Cancer Center

News | Virtual and Augmented Reality | September 25, 2019
A UCLA-led study has found that using three-dimensional virtual reality (VR) models to prepare for kidney tumor...
3D Systems Earns Additional FDA Clearance for D2P Medical 3-D Printing Software

3D Systems’ D2P FDA-cleared software allows clinicians to 3-D-print diagnostic patient-specific anatomic models. Image courtesy of 3D Systems.

Technology | Medical 3-D Printing | September 12, 2019
3D Systems has received additional U.S. Food and Drug Administration (FDA) 510(k) clearance for its D2P software...
AJR Publishes Gender Affirmation Surgery Primer for Radiologists. transgender radiology images,

Scout image from contrast-enhanced CT shows erectile implant; stainless steel and silicone anchors (arrow) transfixed to pubic bone are asymmetric.

News | Orthopedic Imaging | September 05, 2019
September 5, 2019 — An ahead-of-print article published in the December issue of the American Journal of Roentgen
Delaware Imaging Network Now Offers NeuroQuant Brain Imaging MRI Software
News | Neuro Imaging | August 29, 2019
Delaware Imaging Network (DIN), Delaware’s largest network of outpatient medical imaging centers, has added NeuroQuant...
Smoldering Spots in the Brain May Signal Severe MS

NIH researchers found that dark rimmed spots representing ongoing, “smoldering” inflammation, may be a hallmark of more disabling forms of multiple sclerosis. Image courtesy of Reich lab, NIH/NINDS.

News | Neuro Imaging | August 22, 2019
Aided by a high-powered brain scanner and a 3-D printer, National Institutes of Health (NIH) researchers peered inside...
RSNA and ACR to Collaborate on Landmark Medical 3D Printing Registry
News | Medical 3-D Printing | August 08, 2019
The Radiological Society of North America (RSNA) and the American College of Radiology (ACR) will launch a new medical...
Synaptive Medical Launches Modus Plan With Automated Tractography Segmentation
Technology | Neuro Imaging | August 07, 2019
Synaptive Medical announced the U.S. launch and availability of Modus Plan featuring BrightMatter AutoSeg. This release...
TeraRecon Unveils iNtuition AI Data Extractor
News | Advanced Visualization | July 03, 2019
Artificial Intelligence (AI) and advanced visualization company TeraRecon announced its new iNtuition AI Data Extractor...
A 3-D printed model (left) and a model constructed in augmented reality (right), both of a kidney with a tumor. In both models, the kidney is clear; the tumor is visible in purple on the AR model and in white on the 3-D printed model.

A 3-D printed model (left) and a model constructed in augmented reality (right), both of a kidney with a tumor. In both models, the kidney is clear; the tumor is visible in purple on the AR model and in white on the 3-D printed model. Photo courtesy of Nicole Wake, Ph.D.

Feature | Advanced Visualization | July 02, 2019 | By Jeff Zagoudis
Three-dimensional (3-D) printing and...